Document Feedback - Review and Comment
Step 1 of 4: Comment on Document
How to make a comment?
1. Use this to open a comment box for your chosen Section, Part, Heading or clause.
2. Type your feedback into the comments box and then click "save comment" button located in the lower-right of the comment box.
3. Do not open more than one comment box at the same time.
4. When you have finished making comments proceed to the next stage by clicking on the "Continue to Step 2" button at the very bottom of this page.
Important Information
During the comment process you are connected to a database. Like internet banking, the session that connects you to the database may time-out due to inactivity. If you do not have JavaScript running you will recieve a message to advise you of the length of time before the time-out. If you have JavaScript enabled, the time-out is lengthy and should not cause difficulty, however you should note the following tips to avoid losing your comments or corrupting your entries:
-
DO NOT jump between web pages/applications while logging comments.
-
DO NOT log comments for more than one document at a time. Complete and submit all comments for one document before commenting on another.
-
DO NOT leave your submission half way through. If you need to take a break, submit your current set of comments. The system will email you a copy of your comments so you can identify where you were up to and add to them later.
-
DO NOT exit from the interface until you have completed all three stages of the submission process.
(1) This policy states requirements for staff and students of Charles Sturt University (the University) to practise, promote and defend academic integrity. (2) This policy is intended to ensure the following: (4) Research integrity is addressed by: (5) The Student Misconduct Rule 2020 states: (6) The subject outline tool includes information about academic integrity and provides mandatory text for each subject outline. (7) The Course and Subject Procedure - Coursework Design includes requirements for course design to provide opportunities for students to achieve ethical and sustainable practice in their discipline or profession: including helping students to develop an understanding of academic integrity. (8) Academic integrity is a fundamental value of the University as a learning, teaching and research community. Academic integrity means: (9) Academic integrity is essential to: (10) Academic integrity includes the integrity of staff academic decisions about students. (11) Staff must make academic decisions about students fairly and objectively based on all the relevant, available and admissible evidence, and not based on inducements, irrelevant considerations, personal bias or ill-will. (12) Where staff have an actual, potential or perceived conflict of interest, in relation to an academic decision, they must declare this by the process stated in the Conflict of Interest Procedure. (13) Students may appeal an academic decision: (14) Where staff are found to have breached academic integrity in an academic decision about students, they may be subject to disciplinary processes under the Enterprise Agreement. (15) The University takes an educative approach to academic integrity. (16) Academic integrity training will be provided to students: (17) All students will be trained in research integrity before they begin a research project, whether for a higher degree by research course, a research component of a coursework course or in a coursework subject that involves research with human subjects. (18) All academic staff and professional/general staff who support academic governance, assessment, learning and teaching or research will be trained in academic integrity and in research integrity. (19) The Academic Integrity Procedure states detailed requirements for training students and staff in academic integrity and research integrity. (20) The University will use a range of methods to ensure academic integrity is maintained, including specialist academic integrity monitoring software to check student assessments and textual theses submitted by higher degree research candidates. The Academic Integrity Procedure provides further detail. (21) To submit an assessment, students must agree to have their work checked by academic integrity monitoring software as outlined in the Academic Integrity Procedure. (22) Where a course or subject of the University is delivered in partnership with a third-party institution or organisation, the University teaching faculty will collaborate with partner staff to monitor and ensure the academic integrity of the delivery, with oversight by the Academic Quality and Standards Committee. (23) The Academic Integrity Procedure states detailed requirements for academic integrity monitoring and reporting. (24) The descriptions in this section supplement the definitions of the same terms in the Student Misconduct Rule 2020 and Research Misconduct Procedure. These descriptions are intended to explain the University’s approach to breaches of academic integrity: (25) Academic misconduct and research misconduct are breaches of academic integrity. (26) Academic misconduct is dishonest behaviour that misrepresents a person’s level of academic achievement in assessment, or their scholarly achievement in a work of scholarship. Behaviours that constitute academic misconduct include: (27) Research misconduct includes a serious breach of the Australian Code for the Responsible Conduct of Research 2018. The different types and levels of breach are defined in the Research Policy and Research Misconduct Procedure. (28) Students with an approved study access plan may be granted permission to use certain tools in their assessment that are not listed in the subject outline. When such permissions are granted, the Accessibility and Inclusion Support team will provide information on how students are to use these tools while maintaining academic integrity. (29) Anyone who reports cases of suspected academic or research misconduct must not be victimised or discriminated against. (30) A suspected case of academic misconduct should be reported as per the Academic Integrity Procedure. (31) If a student is found to have committed academic misconduct or research misconduct, they will be subject to penalties under the Student Misconduct Rule 2020. (32) Schedule 1 of the Student Misconduct Rule 2020 collates authorities that the Rule grants to appointed officers. (33) Oversight of academic integrity, including monitoring of potential risks, is in accordance with the University Governance Framework, Risk Management Policy and Academic Quality Policy. For courses and subjects delivered through educational partnerships, the monitoring and reporting requirements of the University Partnerships Policy and Procedure also apply. (34) All allegations of academic misconduct and research misconduct by students, including outcomes and penalties, will be recorded on a university database and managed in accordance with the Records Management Policy and Procedure. (35) The Office of Academic Quality, Standards and Integrity will coordinate and prepare the Annual Academic Integrity and Misconduct Report to the Academic Senate and the relevant sub-committee(s). (36) The Research Integrity Unit will report de-identified details of staff research misconduct allegations, findings of research misconduct and disciplinary outcomes, to the University Research Committee. (37) Where an academic staff member is found to have engaged in academic misconduct, the Executive Director, People and Culture will provide a de-identified report of the finding and any disciplinary penalty to the Academic Senate and the relevant sub-committee(s). (38) The University expects all members of the University community (that is, all those included in the scope of this policy) to contribute to: (39) The Academic Integrity Procedure states detailed requirements in relation to: (41) This policy uses the following terms:Academic Integrity Policy
Section 1 - Purpose
Scope
Top of PageSection 2 - Policy
Academic integrity
Integrity of academic decisions
Educative approach to academic integrity
Academic integrity monitoring
Academic integrity of third-party deliveries
Breaches of academic integrity
Types of academic integrity breaches
Reporting breaches of academic integrity
Consequences of breaching academic integrity
Reporting of academic misconduct and research misconduct
Responsibilities
Top of Page
Officer or body
Responsibility
Academic leaders (including Executive Deans and other academic leaders in faculties and schools)
Academic staff
Supervisors of students’ research (including research in coursework courses)
Model research integrity, educate students and higher degree by research (HDR) candidates about research integrity, and report suspected breaches of research integrity for investigation
All staff who support academic work or who have dealings with students (including supervisors of academic staff, professional/general staff etc.)
Office of Academic Quality, Standards and Integrity
Division of Learning and Teaching
Student Life
Facilities Management
Reasonably ensure that contract cheating services are not promoted on campuses (through fliers, posters or other advertising)
Course Directors
Academic Integrity Officers
Appointed officers and student misconduct committees
Hear and decide misconduct matters and impose penalties in accordance with the Student Misconduct Rule 2020
Section 3 - Procedure
Top of PageSection 4 - Guidelines
Top of PageSection 5 - Glossary
Top of PageSection 6 - Document context
Compliance drivers
Higher Education Standards Framework (Threshold Standards) 2021
Review requirements
As per the Policy Framework Policy
Document class
Academic